CSP
−
902RFM207E
−
1
ROTORCRAFT FLIGHT MANUAL
MD900 (902 Configuration with PW 207E)
Optional Equipment
RDR 1400C Weather Radar
Original
10
−
69
FAA Approved
Reissue 2
ON
TST
STBY
OFF
60
SRCH GAIN
MIN
MAX
BCN
GAIN
PUSH
CODE
MIN
MAX
PULL
STAB
OFF
TILT
0
+5
+10
+15
-5
-10
-15
Wx
WxA
SRCH
BCN
f927
−
09
0
FUNCTION SELECTOR
PRIMARY MODE
SELECTORS
SECONDARY MODE SELECTOR AND
GAIN CONTROLS
ANTENNA
CONTROL
Figure 10
−
25. CP 113
Operational controls:
Function Selector
OFF
Removes system power.
STBY
System is operationally ready; no display.
TEST
Displays a test pattern without transmitting, identified by TEST and
RT FAULT.
ON
System transmits in normal operation.
60
5
is not supported by this installation and functions the same as “ON”.
Primary Mode Selectors (PUSH ON/ PUSH OFF)
Wx
Selects weather mode, the primary mode of operation. Weather displayed
and Wx appear on screen. When pressed again, the weather mode is removed.
If no other mode button is active, the Wx mode remains.
WxA
Selects weather alert mode. WxA appears and Target Alert is enabled.
SRCH
Pressing this push button selects the three Search modes in sequential
cyclic manner (i. e., Search 1, Search 2, Search 3, etc.).
Search modes are as follows:
Search 1
- Sea clutter rejection. Active on the ten- mile range or less.
Search 2
- Short range precision mapping. Active on the ten- mile range
or less.
Search 3
- Normal surface mapping.
NOTE
:
Beacon mode is compatible with both weather mode and Search mode.
Summary of Contents for MD900 Explorer
Page 4: ......
