Category A Operations
Additional Operations
CSP
−
902RFM207E
−
1
ROTORCRAFT FLIGHT MANUAL
MD900 (902 Configuration with PW 207E)
FAA Approved
Reissue 2
Revision 4
11
−
45
PART IX
ADDITIONAL OPERATIONS AND PERFORMANCE DATA
11
−
9.1. CATEGORY A OEI TRAINING
To simulate OEI operations in a Category A environment, follow the profiles as
described in ``Part 3, Takeoff and Landing Procedures'', of this section.
Operate at the recommended gross weight as depicted in Figure 11-9.1. See example
below.
Observe normal (twin) engine operating limitations (Ref. Section II).
NOTE
:
Operating at the recommended gross weight, assists the pilot in maintaining
normal (twin) engine operating limitations and accurately simulates actual OEI
conditions.
Description:
This chart (Ref. Figure 11-9.1) reflects the weight at which Category
A OEI training may be performed with the operating engine within normal (twin)
engine operating limitations.
Use of Chart:
The following example explains the correct use of the chart in
Example
:
Wanted: Maximum gross weight for training under the following conditions.
Known: H
P
= 4000 FT (1219m), OAT = 10
°
C
Method: Enter the chart at 10
°
C and move vertically to 4000 H
P
(1219m) curve.
At this point move directly to the left and read from the gross weight scale,
5200 LB (2359kg).
Summary of Contents for MD900 Explorer
Page 4: ......
