6
6. Thread the wire from Goal Box (#5) through the openings of the End Apron and support of the playfield to the
opening of apron and use Velcro Straps to fix Scorer Wire. See FIG.2 A & 2B.
7. Attach the Goals (#5) to each End Apron using three Screws (#16). See FIG.2.
8. Attach the Electronic Scorer (#10) to the side apron in the pre-drilled holes using two Screws (#14). Insert the
Scorer Wire into the Electronic Scorer (#10). See FIG.2C.
9. Tear off the backside paper of the Felt Pad (#15) and stick them at the bottom of the Pushers (#12). See FIG. 2D.
10.
Insert the Adaptor (#17) into the DC Jack. See FIG.2E.
FIG.2D
15
12
FIG. 2B
16
5
10
14
FIG. 2C
Velcro
strap
Scorer
Wire
FIG. 2
FIG. 2A
Underside
the table
FIG.2E
17
13
