9
Inlay Electronic Scorer Trouble Shooting Guides
NO
Conditions
Trouble Shooting
Solvent
1. Pls check the "power switch of Battery Box" if it is turned on.
Turn on the power switch of Battery Box.
2. Pls check the "power switch of Control Box" if it is turned on.
Turn on the power switch of Control Box.
3. Pls check the "battery box wire" if it is plugged into the Control
Box and connected well.
Plug or Re-plug the battery box wire into the Control Box. Pls check if
batteries are installed in the Battery Box.
Result: If it's failed as above 3 steps, and then…
Replace a new Control Box and Battery Box.
1. Pls check the button-"SOUND ON /OFF" on the Control Box if
it is turned on.
Re-press the button-"SOUND ON /OFF" on the Control Box.
If this fails to resolve the problem,
Replace a new Control Box.
1. Pls check the "Time Display Wire and Scorer Display Wire" if
both are plugged into the Control Box well.
Re-plug the Time Display Wire and Scorer Display Wire into the Control
Box.
2. No numbers displayed on "Timer" but on 1 or 2 pcs Scorers.
Interchange the Time Display Wire and Scorer Display Wire, and plug into
the Control Box, it will come out the conditions as following a/b:
a) If numbers are displayed: Replace a new Time Display and Time
Display Wire.
b) If no numbers on Timer: Replace a new Control Box.
3. No numbers displayed on "1 pc Scorer" but on Timer and 1 pc
Scorer.
Interchange both of two Scorer Display Wires and plug into the Control
Box:
a) If numbers are displayed: Replace a new Scorer Display Wire.
b) If no numbers on Scorer: Replace a new Control Box.
4. No numbers displayed on "2 pcs Scorers" but on Timer.
Interchange the Time Display Wire and Scorer Display Wire, and plug into
the Control Box.
a) If numbers are displayed: Replace new Scorer Display and Scorer
Display Wire.
b) If no numbers on Scorers: Replace a new Control Box.
1. Pls check if the "Time Display Wire" and "Scorer Display Wire"
are connected well into the Control Box.
Replug the Time Display Wire and Scorer Display Wire
and connect them to the Control Box.
2. Incomplete numbers on "1pc Scorer" only.
Take out both of Scorer Display and interchange to re-install:
a) If numbers are displayed: Replace a new Scorer Display Wire.
b) If it still is not working: Replace a new Scorer Display and Scorer
Display Wire.
3. Incomplete numbesr on "2pcs Scorers" with the same character
or different numbers.
Replace new Scorer Displays, Scorer Display Wire and Control Box.
4. Incomplete numbers on Timer only.
Replace a new Time Display and Time Display Wire .
5. Incomplete numbers on all of the Scorer Displays and Time
Display with the same character .
Replace a new Control Box.
6. Incompete numbers on "2pcs Scorer Display & Time Display".
As same as the image below-
Please re-check the Scorer Display Wire and Time Display Wire if they are
plugged in the correct socket on the Control box.
1. Pls check the button-"START" on the Control Box if it is turned
on.
Re-press the button-"START" on the Control Box.
2. Pls check the "Puck Catcher Wire with Sensor-1 & 2" if both are
connected with the Control Box well.
Re-plug the Puck Catcher Wire with Sensor-1 & 2 on the Control Box and
connected well.
3. "1 pc Scorer": Failed to keep the score.
Interchange the Puck Catcher Wire with Sensor-1 & 2, and then plug into
the Control Box, it will come out conditions as following a/b:
a) If scorer keep score: Replace a new Puck Catcher Wire with Sensor.
b) If it's unworkable: Replace a new Control Box.
4. "2 pcs Scorers": Failed to keep the score.
Replace a new Control Box.
F
Unworkable button on
the Control Box
Pls check the "Electronic Scorer Operation Guides" on the
Assembly Instruction.
Refer to the Electronic Scorer Operation Guides and re-operate.
If still, inoperable, please replace a new Control Box.
D
Incomplete Numbers
displayed on
Scorers/Timer
E No counting on Scorers
A
No sound on Control
Box and no numbers
displayed on Scorers
B
No sound on Control
Box
C
No numbers displayed
on Timer/Scorers
+
-
