GAME DESCRIPTIONS
Press
“ON/OFF START”
to turn the game on. The LED will display “2P”. Press
“PLAYER”
to choose between 1 or 2 players.
In the 2 Player mode, after pressing
“ON/OFF START”
the LED will display a 5 second countdown. The indicator light will
show against PLAYER 1 and the target will move into position. After the sound finishes, the LED will countdown from 60
seconds. Each time the target is shot successfully, a sound is heard. PLAYER 1’s turn ends after the target has been shot 3
times, or the 60 seconds have elapsed.
For PLAYER 2’s turn, the LED will display a 5 second countdown. The indicator light will show against PLAYER 2 and the
target will move into position. After the sound finishes, the LED will countdown from 60 seconds. Each time the target is
shot successfully, a sound is heard. PLAYER 2’s turn ends after the target has been shot 3 times, or the 60 seconds have
elapsed. The time of the fastest player will blink and that player’s indicator light will turn on. If the times are equal, the times
will blink and both player indicator lights will turn on. If neither player has successfully completed the shots, then the display
will show “00”.
In the one player mode, after pressing
“ON/OFF START”
the LED will display a 5 second countdown. The indicator light will
show against PLAYER 1 and the target will move into position. After the sound finishes, the LED will countdown from 60
seconds. Each time the target is shot successfully, a sound is heard. PLAYER 1’s turn ends after the target has been shot 3
times, or the 60 seconds have elapsed. Then the LED displays a 5 second countdown, the target moves into position and the
game begins again. If the target is not shot within 2 minutes then the game turns off.
Press and hold
“ON/OFF START”
for 2 seconds to turn the game off.
If the game is inactive for a period of 5 minutes then it will turn off. There is no sleep mode.
1.
2.
3.
4.
5.
6.
Battery Box: Unscrew the bolt using a screwdriver and open the battery box. Insert 3x1.5v “AA” batteries ( not included) in
the sequence of polarity as shown on the inside cover. Then close the cover using a screwdriver.
BATTERY INSTALLATION
ELECTRONIC SCORER OPERATION
SG040Y20001
www.medalsports.com
5
(Continued on the next page)
English
The batteries must be installed according to their correct polarization (+ and -).
Please clean the battery contacts and also those of the device prior to battery installation.
If the game will not be used for a long period of time, we recommend removing the batteries.
a.
b.
c.
REMINDING:
Requires
3x1.5V AA
batteries (not included).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.
1.
2.
3.
WARNING
