9
8
Step 2
Step 2: Cut Tubing Length
a)
Place the Hearing Aid Body
behind the ear so the Earhook
rests comfortably on top of the
ear (in front of any eye wear).
b)
Insert Ear Dome, with Tubing
attached, into ear canal, and
align Tubing next to Earhook.
c)
Use a pen and mark a line
on the Tubing ABOVE the
bottom of the Earhook tip.
Cut Tubing at marked line.
Mark and Cut Here
Overlap
Step 3
Step 3: Attach Tubing
to Earhook
Using your thumb and first finger, hold
the Tubing up to the Earhook tip, and
twist back and forth until the Tubing
slides OVER the Earhook tip.
Make sure the ‘mushroom’ portion of the
Ear Dome points into the ear canal.
‘Measure twice, cut once!’
Please note: This length will vary.
Tubing must be measured and cut
separately for
each of your ears.