Dynascan Manual (RT3005G) v_0611
Page 32
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Issue 1
Right click on the blue task bar at the top of the window to view
Select Serial Port
and
Set
Capture Method
(see below)
10.2.1
Select Serial Port
Click on select serial port to set up the port you will use for programming the radio. If you are
not sure which port you are using open control panel and select the system icon then click
the hardware tab. Next click the device manager button then the + next to ports. This will
show the port in use.
