Dynascan Manual (RT3005G) v_0611
Issue 1
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Page 49
13.
Click on the Transfer button to transfer the data to the setup menu. The transfer button
will appear when you select the files.
14.
Replay all four files before starting on the pitch calibration (see Section 13.2.4 Replay
function).
15.
When calibrating pitch choose two files on the same side of the pole but in different
directions and then select the validator icon.
16.
Follow steps 7 and 8 above but this time create a user defined line at 90 to the roll line.
17.
Make the slice box fit the poles and you should see two images in the swathe view, at
an angle to one another.
