Assembly Instructions
14 X 14 Party Tent Style
V2.0 Party Tent 14 X 14 Size
Connector Types
Frame Component Diagram
Begin by assembling the Roof Frame. Start by connecting
the cross poles together that will create the center ridge of
the tent. When this is completed join the rafter poles to
these cross poles. The last part of the roof assembly is to
add the cross poles that create the eaves of the tent.
Ridge Pole and Eave Poles Assembled
Frame Assembly with Rafter Poles Attached
INSTALLING THE ROOF COVER
Before installing the upright leg poles to the frame
structure the roof cover (#9) must be put over the
assembled roof frame and attached using the bungee
cords (#13). This is best done from underneath by
passing the elastic cord of the bungee through the eyelets
in the cover, stretch it around the pole and back over the
toggle to secure. In calm conditions only the corners will
need to be attached with the remainder done once the
frame is fully erected. The more windy the weather then
additional bungee cords will be needed at this stage to
ensure that the cover is securely attached.
