MX-2100/2104
Installation and Operation Manual
Appendix F Command Set Description
Commands
F-3
CLR LOOP
Purpose
Deactivate the specified user-initiated test or loop. Refer to the
Diagnostics
chapter
for a description of the available tests.
Format
CLR LOOP [looptype] { [ML A] [ML B] [i:j] }
or
CLR LP [looptype] { [ML A] [ML B] [i:j] }
Use
1. To deactivate a specific type of loop on main link A, type:
CLR LOOP L ML A <ENTER>
or
CLR LP L ML A <ENTER>
CLR LOOP R ML A <ENTER>
or
CLR LP R ML A <ENTER>
CLR LOOP V54.2 ML A <ENTER>
or
CLR LP V54.2 ML A <ENTER>
CLR LOOP V54.3 ML A <ENTER>
or
CLR LP V54.3 ML A <ENTER>
CLR LOOP L ML <ENTER>
or
CLR LP L ML <ENTER>
CLR LOOP R ML <ENTER>
or
CLR LP R ML <ENTER>
CLR LOOP V54.2 ML <ENTER>
or
CLR LP V-54.2 ML <ENTER>
CLR LOOP V54.3 ML <ENTER>
or
CLR LP V-54.3 ML <ENTER>
For main link A, it is not necessary to specify the link, e.g., you can type
CLR LOOP L ML <ENTER>
instead of
CLR LOOP L ML A <ENTER>.
2. To deactivate a specific type of loop on main link B, type:
CLR LOOP L ML B <ENTER>
or
CLR LP L ML B <ENTER>
CLR LOOP R ML B <ENTER>
or
CLR LP R ML B <ENTER>
CLR LOOP V54.2 ML B <ENTER>
or
CLR LP V54.2 ML B <ENTER>
CLR LOOP V54.3 ML B <ENTER>
or
CLR LP V54.3 ML B <ENTER>
3. To deactivate all the loops of a certain main link, type:
For main link A:
CLR LP ML A <ENTER>
or
CLR LOOP ML A <ENTER>
For main link B:
CLR LP ML B <ENTER>
or
CLR LOOP ML B <ENTER>
4. To deactivate a specific type of channel loop or test, type:
CLR LOOP L i:j <ENTER>
or
CLR LP L i:j <ENTER>
CLR LOOP R i:j <ENTER>
or
CLR LP R i:j <ENTER>
CLR LOOP PRBS_INJ i:j <ENTER>
or
CLR LP PRBS_INJ i:j <ENTER>
(data channel only)
CLR LOOP TONE_INJ i:j <ENTER>
or
CLR LP TONE_INJ i:j <ENTER>
(
voice channel only)
CLR LOOP BERT i:j <ENTER>
or
CLR LP BERT i:j <ENTER>
(data channel only)
Note
