MX-2100/2104
Installation and Operation Manual
Appendix F Command Set Description
Commands
F-49
NAME
= [mux name]
LAST RESET
= [date and time of last reset on KCL.2]
ON LINE DATABASE
= 1
NODAL CLOCK
= ML
ACTIVE ML
= ML-A
ACTIVE ML TIMING
= DTE
ML MODE
= SINGLE
MONITOR =
NONE
ALARM RELAY
= ON
INSTALLED MODULES:
ML/IO:
ML-A ML-B OPTION
1
2
3
DB: ML --- --- --- KLS.1/N
---
HW: ML.1
--- --- --- KLS.1/N
---
IO: 4 5
6 7
8 9
DB:
--- KVF.5/E1/M
--- ---
--- KVF.4/S0
HW:
--- KVF.5/E1/M
--- ---
--- KVF.4/S0
IO: 10 11 12
DB: --- --- ---
HW: --- --- ---
TIME:08:14:34 DATE:Mon Jun,08,1998
The display fields are as follows:
•
NAME
- Lists the logical name assigned to MX-2100.
•
LAST RESET
- Displays the date and time of the last reset on KCL.2.
•
ON LINE DATABASE
- Indicates the number of the active database:
1 or 2.
•
NODAL CLOCK
- Indicates the source for the link transmit clock: the internal
oscillator, a module channel, or the main link (ML). ML can only appear when
the main link timing mode is DTE. Refer to the
Configuration Parameters
appendix for additional information.
•
ACTIVE ML
- Indicates the currently-active KML module(s): ML-A for the KML
module installed in slot 3, and/or ML-B for the module installed in slot 4, or
BOTH for a MX-2100 operating in the dual link, priority bumping or switched
backup mode.
•
ACTIVE ML TIMING
- Source clock of the agent.
•
ML MODE
- Indicates the current main link mode: SINGLE, REDUNDANCY,
DUAL LINK, PRI_BMP, SW_BACK.
•
MONITOR
- Indicates the module channel monitored by means of the
MX-2100 front panel indicators, or NONE.
•
ALARM RELAY
- Indicates the status of MX-2100 alarm relay contacts: ON or
OFF.
•
INSTALLED MODULES
- Lists, for each slot, the installed module and the
module programmed in the database.
