Introduction
2-1
Chapter 2
Installation
2.1 Introduction
This chapter provides installation and setup instructions for the MX-2100 enclosure
and for the modules that are part of the basic system configuration. The
information in this chapter includes:
•
The site requirements and prerequisites necessary for installing MX-2100
•
The equipment needed to run MX-2100
•
The contents of the MX-2100 package
•
The installation and setup of the MX-2100 system
•
The various MX-2100 interfaces and connection instructions
•
The initial setup and configuration of the MX-2100 system.
After installing the MX-2100 system, it is necessary to configure the system in
accordance with the specific user's requirements. Refer to the
Configuring
MX-2100
chapter.
After the preliminary configuration, the system can be managed by MX-2100’s
front panel or by means of a SNMP network management station. Refer to the
User's Reference Manual
of the network management station for operating
instructions.
In case a problem is encountered, refer to the
Diagnostics
chapter for test and
diagnostics instructions.
No internal settings, adjustment, maintenance, and repairs may be performed
by either the operator or the user; such activities may be performed only by a
skilled technician who is aware of the hazards involved. Always observe
standard safety precautions during installation, operation, and maintenance of
this product.
Warning
