MX-2100/2104
Installation and Operation Manual
Chapter 3 Configuring MX-2100
Control of MX-2100 Operation
3-3
Table 3-1. MX-2100 Front Panel Configuration Parameters
Display
Parameter Description
Refer To...
SYSTEM
PARAMETER
Display and selection of system parameters:
– Main link master clock source
– Main link fallback clock source
– Downloading
– Main link operating mode
– Active main link
LINK PARAMETER Display and selection of main link parameters
CH PARM
Display and selection of parameters for the various
types of modules and module channels
SP PARAMETERS
Display and selection of the supervisory port
parameters:
– Data rate
– Number of data bits
– Parity
– Interface type
– Management by SNMP network management stations
In addition to the parameters that can be configured from the front panel, the
MX-2100 has parameters that can be controlled only from a supervision terminal
or an SNMP network management station. These parameters are presented in
Chapter 4, Operation
.