Technical Manual
Blind Push Button Smart 55
BE-JTA5504.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
42
42
4.4.3.9 External function – Basic function: Send state
The following figure shows the available settings:
Figure 27: Settings – Basic function: Send state
With the basic function "Send state", fixed values can be sent for a pressed button (rising edge) and a
released button (falling edge). This function can be used to implement triggering applications.
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Value for the pressed button
Off
On
Defines the sending behaviour of the
button when pressed
Value for the released button
Off
On
Defines the sending behaviour of the
button when released
Table 27: Settings – Basic function: Send state
For details on the
button/object description
and the
lock object
, see
For details about
display
4.4.3.1 Identical Settings – Representation on the display
The current status of the actuator is displayed via the "
Status for display
" object. If there is no group
address on the object, the switching status of the button is shown in the display.
The following table shows the available communication objects:
Number
Name/Object Function
Length Usage
15
Button 3: – Send state
1 Bit
Sends the respective value when pressing and
releasing the button
18
Button 3: – Status for display
1 Byte
Receiving the status of the current switching
state for the indication in the display
+5
Button 4
Table 28: Communication objects – Basic function: Send State