Technical Manual
Blind Push Button Smart 55
BE-JTA5504.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
44
44
4.5 Time switch
4.5.1 Settings
The following figure shows the available settings:
Figure 29: Settings – Time switch: Settings
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Name of Time switch (for
Visualisation interface)
free text
[up to 20 bytes allowed]
Allocation of a name.
Output objects
height and slats
only height
Setting whether output objects for
shutters or blinds are to be displayed.
Switching times in the
device
will be transmitted
remain unchanged
Setting whether the parameter block
for the switching times is transmitted
or not.