15
2.
Before turning on the system, the applicator must be
placed in the cradle. Press the power button to turn
the system on; the elo- s system indicators will flash for
several seconds, then the indicator next to the power
button will turn green.
Now the system is ready for use.
3.
Select the elo- s level you want to use by pressing
the appropriate elo- s Level button: High, Medium or
Low; the active level will illuminate a white indicator
light. (Refer to the chart on page 16 of the user
guide to set the right
level for your skin type).
4.
The elo- s cartridge is pre-loaded with a set number of pulses for
your use; the counter starts at 100% and decreases as you use it.
The amount of pulses remaining in the
cartridge is indicated
by the lights on the panel, as shown. Once the elo- s cartridge
reaches 5% of its capacity, a red light will start blinking, and at
0%, the red light will remain constant, indicating that the
cartridge must be replaced and responsibly disposed of. (Please
refer to the WEEE explanation on page 27).
1.
Connect the power cable into the system and then
into the wall electrical outlet. An orange indicator
will appear next to the power button.
EN
Summary of Contents for Epilator
Page 28: ...facial kit...
