Mea SMAC 90-H Owner'S/Operator'S Manual Download | Manualshive

Page: 11 / 90

background image

Document No

7215-D0006-02

7

5. INSTALLATION

The SMAC90H is designed as an integrated compressor system for connection to an existing hydraulic

system. SMAC90H only requires connection of a pressure line in, a return line out and a connection of

the motor drain line (if applicable) to the tank.

WARNING(!) When setting the compressor unit up, ensure there is a safety mechanism in place to

prevent any excessive flow or pressure into the compressor hydraulic circuit. MEA will not warrant

any damage caused and will void warranty due to inadequate safety protection of the existing hydraulic

system.

1.  Install SMAC90H into position on the vehicle using 4 x min. M12 x 1.75 Grade 8.8 Fasteners.
2.  Install the hydraulic lines, i.e. pressure in, return out and drain line.
3.  If purchased the Frameless version only; install the cooler and connect the compressor cooler lines to

both the cooler and the compressor, see APPENDIX A, Page 39.

4. Connect the electrical control box to the vehicle; be sure to place an in-line weatherproof fuse

(30A – 12V and 20A – 24V) within 300mm of the vehicle battery. Ensure the control box is
compatible with your vehicle’s voltage rating.

5. Connect the pressure gauge line to the SMAC90H, see circuit diagram (Page 21)
6. Connect the terminals of the electrical loom as per the circuit diagram relevant to your vehicle

to both the vehicle and the SMAC90H.

7. Check the level of oil in the compressor.
8. Switch on the vehicle, turn on the compressor at the control box and test the hydraulic

solenoid for operation.

9. Turn the unload/load switch to load and check the compressor builds pressure to the regulated

pressure setting.

10. Plug an air tool into the air outlet and operate checking that the compressor works as

required, run for a min. 10mins.

11. Unload the compressor, switch off the control box, switch off the vehicle and check for any

visible signs of hydraulic fluid leakage.

12. When cool (safe to touch), and switched off, re-check compressor oil level

«
...
9
10
11
12
13
...
»

Summary of Contents for SMAC 90-H



























































































Reviews:

No comments

Related manuals for SMAC 90-H

Brand: Raider Pages: 74

Brand: LACAIR Pages: 16

JEFC200L10B-230

Brand: Jefferson Professional Tools & Equipment Pages: 24

Brand: Johnson Controls Pages: 64

Brand: Powerex Pages: 16

Brand: Sanborn Mfg Pages: 24

Brand: Parkside Pages: 62

Brand: California Air Tools Pages: 15

Brand: California Air Tools Pages: 17

Cordless Spotlight Compressor

Brand: Wagan Pages: 13

Marshall and TSR H-1322B

Brand: Humboldt Pages: 12

Brand: Vapotherm Pages: 32

Brand: ACC Pages: 20

ELECTRA-SAVER EAU PD - 200 HP

Brand: Gardner Denver Pages: 65

Brand: Gardner Denver Pages: 96

Brand: Idex Pages: 40

Brand: WEATHER DIRECT Pages: 8

Brand: EINHELL Pages: 162

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands