56
TIMER
Press the Timer Button to set an Off Timer between 1 and 10 hours. Continue pressing the
Timer Button until the desired number of hours is reached, the set number will flash three times and
then the display will change back to the room temperature. H will appear on the display to confirm the
Timer has been set. The machine will automatically stop running after the set number of hours. To see
the remaining number of hours at any point, press the Timer Button and the number will appear on the
display.
UV LAMP
Press the UV/Ioniser Button to turn the UV lamp on. This function will kill bacteria in the water.
The UV icon will appear on the display to confirm that the UV lamp is on. Press the UV/Ioniser
Button again to turn the UV lamp off. The UV lamp turns off when the tank is removed from the
base. Never try and look directly at an UV lamp when in use as it could damage your eyesight.
IONISER
Hold the UV/Ioniser Button down for 3 seconds to turn the ioniser on. This function will absorb
dust particles in the air. The plus and minus icon will appear on the display to confirm that the
ioniser is on. Hold the UV/Ioniser Button down again for 3 seconds to turn the ioniser off.
WARM MIST
Press the Warm Mist Button to start the warm mist function. The PTC element in the machine
will start working and the mist will become warm. Three vertical lines will appear on the display to
confirm that warm mist has been set. Activating warm mist will increase the humidification output. Press
the Warm Mist Button again to stop this function. When the warm mist function is off, the machine will
dispense cool mist.
MIST LEVEL
Press the Mist Level Button to change the humidification output level. Output Level 1, 2 or 3
can be chosen (Level 1 is the lowest and Level 3 is the highest). Three horizontal lines on the left-hand
side of the display will indicate which mist level has been chosen.
HUMIDSTAT
Press the Humidistat Button to set your desired humidity target, the set number will flash three
times and then the display will change back to the humidity level in the environment. The
humidity target can be adjusted between 40%rh and 80%rh. The machine will run until the desired
humidity target is reached. Please note, when the machine starts working, it will humidify for 2 minutes
regardless of the humidity level in the room.
NO WATER
The icon to the left will appear on the display when there is no water in the water tank. The
unit will automatically stop running.
