4 [EN]
After receiving the unit
, you should check your heater for any transport damage. In case of damage, you should
inform the sender immediately.
Keep the packaging
for the heater in a safe place in order to be able to repack the heater safely if it requires a
service. In order to save space, you can simply cut through the adhesive tape and flat pack the cardboard box.
2. SETUP and INITIAL USE
The air inlet and the air outlet must not be covered whilst the heater is in operation.
Before moving the heater it must be switched off by its ON-OFF switch. The mains plug is to be removed
from the socket only after the fan has stopped running.
For transportation the heater should be secured on a level base and must be prevented from rolling around.
This heater must be used exclusively for heating the air.
3. PRODUCT INDENTIFICATION
MeacoHeat Motion Eye 1.8kW
MeacoHeat MotionMove Eye 2.0kW
1. ODOURS
When first used or when being used after a long time in storage you may notice a slight smell coming from the unit. This
is normal and as long as disperses after a short period of use then it is not an issue.
Motion Sensor
Oscillation base
Handle
Air inlet with filter behind.
On/Off switch
Power cord
Motion Sensor
Handle
Air inlet with filter behind.
On/Off switch
