background image

- 3 -

Captions for Fig. 1

1. Viewfinder
2. Spider vane/diagonal
3. Focuser
4. Main optical tube
5. Polar axis
6. Declination housing
7. Declination lock knob
8. Declination setting circle
9. Counterweights

10. Declination shaft
11. Counterweight safety washer 
12. North leg
13. Pier
14. Latitude locking bolt
15. Pier cap
16. Tripod legs
17. Right ascension setting circle
18. Drive motor housing/control panel
19. Primary mirror cell
20. Polar housing
21. Strap mounting blocks
22. Saddle plate
23. Mounting straps
24. Focuser drawtube

Contents

16" Starfinder Equatorial Telescope

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Parts Listing and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Attaching the Equatorial Head . . . . . . . . . . . . . . . . . . . . 4
Adjusting the Latitude . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mounting the Counterweights. . . . . . . . . . . . . . . . . . . . . 4
Attaching the Focuser Assembly . . . . . . . . . . . . . . . . . . 4
Attaching the Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . 4
Mounting the Primary Mirror Cell . . . . . . . . . . . . . . . . . . 4
Mounting the Secondary Mirror . . . . . . . . . . . . . . . . . . . 4
Attaching the Mounting Straps. . . . . . . . . . . . . . . . . . . . 4
Mounting the Optical Tube. . . . . . . . . . . . . . . . . . . . . . . 4

Balancing the Telescope . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

R.A. Encoder Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
On/Off Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . 5

12vDC Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Collimation of the Optical System . . . . . . . . . . . . . . . . . . . . . 6

Correct Collimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spider Vane Adjustments. . . . . . . . . . . . . . . . . . . . . . . . 6
Secondary Mirror Adjustments. . . . . . . . . . . . . . . . . . . . 6
Primary Mirror Adjustments . . . . . . . . . . . . . . . . . . . . . . 7

The Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Focusing the Viewfinder. . . . . . . . . . . . . . . . . . . . . . . . . 7
Aligning the Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Magnification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Astronomical Observing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Celestial Coordinates: Declination & Right Ascension. . . 8
Polar Alignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Calibrating the Declination Circle . . . . . . . . . . . . . . 9

How to Locate Objects in the Night Sky. . . . . . . . . . . . . 9
Motor Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Southern Hemisphere Operations . . . . . . . . . . . . . 9

Setting Circles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Observing Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Astrophotography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Telescope Maintenance and Servicing. . . . . . . . . . . . . . . . . 12

Care of Optics and Main Tube . . . . . . . . . . . . . . . . . . . 12

Cleaning the Optics . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning the Optical Tube . . . . . . . . . . . . . . . . . . 12

Star Testing the Collimation. . . . . . . . . . . . . . . . . . . . . 12
Telescope Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Slow Blow Fuse. . . . . . . . . . . . . . . . . . . . . . . . . . 13
Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Clutch Pressure Plate . . . . . . . . . . . . . . . . . . . . . 13
Worm Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Meade Customer Service. . . . . . . . . . . . . . . . . . . . . . . 14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

® The name ‘Meade’ and the Meade logo are trademarks

registered  with  the  U.S.  Patent  Office  and  in  principal
countries throughout the world.

© 1998 Meade Instruments Corporation

Summary of Contents for 50 AZ-T

















Reviews: