27
Balancing the Scope
*114mm models ONLY*
STEP 3: Adjust until balance is achieved.
Loosen the
dovetail locking knob
(fig. 1b,#18) slightly and
slide the optical tube (fig. 1b, #4) along the
dovetail receiver
(fig. 1b, 20) until the telescope remains in any given position
without tending to drift up or down in the vertical axis.
NOTE:
Do not over-loosen the
dovetail locking knob
or the
optical tube could come completely off of the mount.
STEP 4: Tighten when balanced.
Relock the
dovetail locking knob
until firm.
Step 3.
Step 4.
26
