background image

24

MEADE CUSTOMER SERVICE
If you have a question concerning your LightBridge Plus telescope, contact the Meade Instruments 
Customer Service Department at (800) 626-3233. Customer Service hours are 8:00 AM to 4:00 PM, 
Pacific Time, Monday through Friday. In the unlikely event that your LightBridge Plus telescope requires 
factory servicing or repairs, call the Meade Customer Service Department first, before returning the 
telescope to the factory, giving full particulars as to the nature of the problem, as well as your name, 
address, and daytime telephone number. The great majority of servicing issues can be resolved by 
telephone, avoiding return of the telescope to the factory. If factory service is required, you will be 
assigned a Return Goods Authorization (RGA) number prior to return.

MEADE LIMITED WARRANTY
Every Meade telescope and telescope accessory is warranted by Meade Instruments Corp. (“Meade”) 
to be free of defects in materials and workmanship for a period of ONE YEAR from the date of original 
purchase in the U.S.A. and Canada. Meade will repair or replace a product, or part thereof, found by 
Meade to be defective, provided the defective part is returned to Meade, freight-prepaid, with proof of 
purchase. This warranty applies to the original purchaser only and is non-transferable. Meade products 
purchased outside North America are not included in this warranty, but are covered under separate 
warranties issued by Meade international distributors.

RGA Number Required: Prior to the return of any product or part, a Return Goods Authorization (RGA) 
number must be obtained from Meade by writing, or calling (800) 626-3233. Each returned part or 
product must include a written statement detailing the nature of the claimed defect, as well as the 
owner’s name, address, and phone number.

This warranty is not valid in cases where the product has been abused or mishandled, where unauthorized 
repairs have been attempted or performed, or where depreciation of the product is due to normal wear-
and-tear. Meade specifically disclaims special, indirect, or consequential damages or lost profit which 
may result from a breach of this warranty. Any implied warranties which cannot be disclaimed are hereby 
limited to a term of one year from the date of original retail purchase.

This warranty gives you specific rights. You may have other rights which vary from state to state.

Meade reserves the right to change product specifications or to discontinue products without notice.

This warranty supersedes all previous Meade product warranties.

Summary of Contents for LightBridge Plus





























Reviews: