Charging
Plug the supplied AC Power Charger to a standard 110V outlet and into the Charge
Input Port located on the back of your LXPS 18. An LED will light up around the Charge
Input Port when charging, and the Status Display will show the charge status of the
battery. If you do not have access to an AC outlet, you can use the Cigarette Lighter
Car Charger to charge the LXPS 18 from your car.
Powering Your Telescope
1. Plug the supplied Cigarette Lighter Adapter into one of the 12V “DC Out” ports.
This powers most telescopes and accessories which use 12V DC, and center
positive polarity.
2. Plug the Telescope Power Cable into the Cigarette Lighter Adapter and plug into
the power port of your telescope. The Telescope Power Cable barrel connector is
center positive, with a 5.5mm outside diameter and 2.5mm inside diameter.
3. Flip the On/Off Power Switch (located at the back of the LXPS 18) on, then press
the DC Output Power Button on the front of the LXPS 18 located below the Status
Display.
On/Off Power Switch
Charge Input Port
LED Light Switch
Red LED Spotlight
Retractable Carry Handle
Included Items
1. LXPS 18 Battery
2. AC Power Charger (US only)
3. Cigarette Lighter Car Charger
4. Cigarette Lighter Adapter
5. Telescope Power Cable
(plugs into Cigarette Lighter Adapter)
