31
Accessing Temperature and Humidity Mode
Press main unit
UP
or
DOWN
until the
IN
icon
on the upper right will flash.
From the remote control: Press
.
Viewing Temperature and Humidity for each Channel
Static Display:
In Temperature and Humidity Mode, press the
CHANNEL
button to recall a different channel.
Channel Auto-Scan Display:
To enable automatic scan of the different channels, press and hold
CHANNEL
, until the
icon
is displayed. Each valid channel will be alternately displayed with a 5 seconds delay.
Recalling of Temperature and Dew Point Displays
In Temperature and Humidity Mode, press the
SET
button to recall temperature and relative
humidity or dew point and relative humidity.
Set the Temperature in Celsius or Fahrenheit.
In Temperature and Humidity Mode, press and hold the
SET
button to toggle the temperature in
Celsius (ºC) or Fahrenheit (ºF).
Activating/Deactivating the Temperature Alerts
In Temperature and Humidity Mode, press the
ALARM/CHART
button to recall a current
temperature for the corresponding channel, the upper temperature alert with
icon (if disabled,
displays
OFF
), or lower temperature alert with
icon (if disabled, displays
OFF
).
Once the above alerts are displayed, press
UP
or
DOWN
to enable or disable the corresponding alert.
Programming the Temperature Alerts
• In the Temperature and Humidity Mode, press the
ALARM/CHART
button selecting
the
desired
alarm.
• Press and hold the
ALARM/CHART
button until the remote temperature and
or
icon
starts flashing.
• Adjust the temperature digits for the Temperature Alert using the
UP
or
DOWN
. Press and hold
either button for fast digits advance.
• Press the
ALARM/CHART
button to confirm selection and return to the temperature alert
selection screen.
Disabling Temperature Alarm(s)
In the Temperature & Humidity Mode, press the
ALARM/CHART
button to disable the alarm(s).
Viewing the Max/Min Channel Temperature and Humidity
In the Temperature & Humidity Mode, press the
MEMORY
button to recall a current temperature
and humidity, minimum temperature and humidity or maximum temperature and humidity at the
remote location.
Resetting the Remote Temperature and Humidity Memory
In the Temperature and Humidity Mode, press and hold the
MEMORY
button to clear memory
for all channels.
TE923W IM1(ENG) HONEYWELL R.pmd
4/11/08, 5:28 PM
31
