9
3.2.3 Device Temperature Measurement
This function can be used to monitor internal temperature of the device, sending values measured and rising alarm when
values are higher than the threshold.
ETS-text
Dynamic range
[default value]
Comment
Temperature Measurement
Enable or disable temperature measurement
Temperature
Difference Sending
Difference between actual and last sent value
which triggers the sending
Temperature
Cyclic Sending
OFF, 1min, 2min, 3min,
4min, 5min, 10min, 15min,
20min, 25min, 30min,
1hour, 2hours, 3hours,
4hours, 5hours, 6hours,
7hours, 8hours
[OFF]
Send the latest voltage value at intervals you
desired
Temperature
e Alarm
Temperature
Threshold
Temperature
Hysteresis
Behaviour On Temperature Alarm
Active
Behaviour On Temperature Alarm
Deactive
Enable or disable the alarm function
Select a threshold value to perform the Behaviour
"
on Temperature alarm Active
"
Select a hysteresis value to perform the Behaviour
"
on Temperature alarm Deactive
"
Select a reaction when temperature is higher than
Temperature Threshold
Select a reaction when temperature is lower than
a
value of "T
emperature Threshold"
- "Temperature
Hysteresis
", e.g.
70°C -1°C = 69°C
Enable
Enable
[70
]
°C
[1
]
°C
OFF, 2
, 3
, 4
, 5
,
°C
°C
°C
°C
6
, 7
, 8
, 9
, 10
°C
°C
°C
°C
°C
[OFF]
Disable
Disable
0-100°C
0-40°C
Send 0
Send 0
Send 1
Send 1
Nothing to do
Nothing to do
