7
The following chart shows the objects that belong to general setting:
ETS-text
Dynamic range
[default value]
Comment
Voltage Measurement
Enable or disable voltage measurement
Voltage Object Type
Select data point type
Voltage Cyclic Sending
OFF, 1min, 2min, 3min,
4min, 5min, 10min, 15min,
20min, 25min, 30min,
1hour, 2hours, 3hours,
4hours, 5hours, 6hours,
7hours, 8hours
[OFF]
Send the latest voltage value at intervals you
desired
Voltage Alarm
Enable or disable the alarm function
Behaviour On Voltage Alarm Active
Behaviour On Voltage Alarm Deactive
Select a reaction when there is abnormal voltage
Select a reaction after abnormal voltage is
removed
2byte[DPT9]
Enable
Send 0
Send 0
Send 1
Send 1
Enable
4byte[DTP14]
Disable
Nothing to do
Nothing to do
Disable
11
12
Output voltage measured
Output voltage alarm
2bytes
1 bit
4bytes
The device sends the measured output voltage
value in V or mV at regular intervals.
When the measured value is out of the normal
working range a telegram with value 0 or 1 is
sent. When the measurement values return to
the normal range a telegram with value 0 or 1 is
sent.
Number
Name
Length
Usage
3.2.2 Output Current Measurement
This function can be used to monitor load conditions, sending current measured and rising alarm when values are higher
than the threshold.
