11
5.
Data format of VOUT_MODE, VOUT_COMMAND, VOUT_TRIM, READ_VIN, READ_VOUT, READ_IOUT, READ_TEMPERATURE
_1 is as below:(Please refer to PMBus_Specification_Part_II_Rev_1-1 for detailed information)
(1)DIRECT Data Format
a.Interpreting Received Values
b.Sending A Value
DIRECT format data is a two byte, two’s complement binary integer. IRECT format data may be used with any command
that sends or reads a arametric value. If a PMBus device uses DIRECT form data, this shall be clearly described in the
product literature.
The host system uses the following equation to convert the value received from the PMBus device into a reading of
volts, amperes, degrees Celsius or other units as appropriate:
◎
.
Please refer to the specification about PV/PC or SVR function
3.14
CANBus Communication Interface
◎
.
For further CAN bus information, please contact MEAN WELL
