Measurement Computing PCI-DAS1200/JR User Manual Download

Page: 6 / 24

Preface

About this User's Guide

What you will learn from this user's guide

This user's guide explains how to install, configure, and use the PCI-DAS1200/JR board so that you get the

most out of the analog input and digital I/O features.

This user’s guide also refers you to related documents available on our web site, and to technical support

resources.

Conventions in this user's guide

For more information

on …

Text presented in a box signifies additional information and helpful hints related to the subject matter you are

reading.

Caution!

Shaded caution

statements present information to help you avoid injuring yourself and others,

damaging your hardware, or losing your data.

< : >

Angle brackets that enclose numbers separated by a colon signify a range of numbers, such as those assigned

to registers, bit settings, etc.

bold

text

Bold

text is used for the names of objects on the screen, such as buttons, text boxes, and check boxes. For

example:

Insert the disk or CD and click the

button.

italic

text

Italic

text

is used for the names of manuals and help topic titles, and to emphasize a word or phrase. For

example:

The

Insta

Cal® installation procedure is explained in the

Quick Start Guide

Never

touch the exposed pins or circuit connections on the board.

Where to find more information

The following electronic documents provide helpful information relevant to the operation of the PCI-

DAS1200/JR board.



MCC's

Specifications: PCI-DAS1200/JR

(the PDF version of the

Specifications

chapter in this guide) is

available on our web site at

www.mccdaq.com/pdfs/Specs/PCI-DAS1200-JR-spec.pdf



MCC's

Quick Start Guide

is available on our web site at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf



MCC's

Guide to Signal Connections

is available on our web site at

www.mccdaq.com/signals/signals.pdf



MCC's

Universal Library User's Guide

is available on our web site at

www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf



MCC's

Universal Library Function Reference

is available on our web site at

www.mccdaq.com/PDFmanuals/sm-ul-functions.pdf



MCC's

Universal Library for LabVIEW

™

User’s Guide

is available on our web site at

www.mccdaq.com/PDFmanuals/SM-UL-LabVIEW.pdf

PCI-DAS1200/JR User's Guide

(this document) is also available on our web site at

www.mccdaq.com/PDFmanuals/PCI-DAS1200-JR.pdf

Summary of Contents for PCI-DAS1200/JR
























Search results

Summary of Contents for PCI-DAS1200/JR

Reviews:

Related manuals for PCI-DAS1200/JR

Brands by name

Popular brands

Measurement Computing PCI-DAS1200/JR, User Manual

Search results

Summary of Contents for PCI-DAS1200/JR

Reviews:

Related manuals for PCI-DAS1200/JR

Brands by name

Popular brands