background image

HM USB-5106.docx 

Trademark and Copyright Information

Measurement Computing Corporation, InstaCal, Universal Library, and the Measurement Computing logo are

either trademarks or registered trademarks of Measurement Computing Corporation. Refer to the Copyrights &

Trademarks section on

mccdaq.com/legal

for more information about Measurement Computing trademarks. 

Other product and company names mentioned herein are trademarks or trade names of their respective

companies.
© 2015 Measurement Computing Corporation. All rights reserved. No part of this publication may be 

reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, by

photocopying, recording, or otherwise without the prior written permission of Measurement Computing

Corporation.

Notice

Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for 

use in life support systems and/or devices without prior written consent from Measurement Computing 

Corporation. Life support devices/systems are devices or systems that, a) are intended for surgical implantation 

into the body, or b) support or sustain life and whose failure to perform can be reasonably expected to result in 

injury. Measurement Computing Corporation products are not designed with the components required, and are 

not subject to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of 

people.

Summary of Contents for USB-5106



















Reviews: