EHC-PF
.
2
.
1.3.
Outline
Interface: (1) Rocker switch (2) AC power adapter input (3-4) RS232 and USB if these interface installed
2.
Unpacking and setup
Take out the scale from the box and place it on a firm, level surface. Avoid locations with rapid temperature changes,
excessive dust, moisture, air currents, vibrations, electromagnetic fields, heat or direct sunlight.
Adjust the leveling feet until the bubble is centered in the circle of the level indicator
(located on the front panel).
NOTE: Ensure that the scale is level each time its location is changed.
Before using the scale for the first time, the internal rechargeable battery should be fully charged for up to 12 hours.
Connect the supplied AC adapter to the power input receptacle underneath the scale. Plug the AC adapter into a properly
grounded power outlet and the battery will begin charging.
If the scale will be stored or transported in the future, save the packaging material to ensure the best possible protection
for the scale.
2.1
Packing List
3.
Display and keypad
3.1
Faceplate
Scale
12Vdc/500mA adapter with positive center
User Manual
