background image

 

                                                                                   

EHW

EM

 

           

.

 

.

 

1.

 

INTRODUCTION 

General and Safety Information 

 

For use in dry environments only.   

 

This product uses a Lead-acid rechargeable battery. Dispose of according to local laws and regulations. 

 

Read and understand all operating instructions before using this product.

 

Keep this manual for future 

reference. 

 

Allow sufficient warm up time. Turn the scale on and allow up to 10 minutes for internal components to stabilize 
before weighing. 

 

Record the weight shortly after placing a load on the platter. Leaving loads in place for extended periods may vary the 
load cell’s output signature and may result in a less accurate reading. 

 

Avoid extended exposure to extreme heat or cold. Optimum operation is at normal room temperature. See operating 
temperature range in the specifications table. Allow the scale to acclimate to room temperature before using. 

 

When storing the scale for extended periods, the battery must be charged every 90 days to avoid premature 
performance degradation. Over time, the operating time per charge will degrade. If the operating time is no longer 
acceptable even after recharging, the battery must be replaced. 

 

Electronic scales are precision instruments. Do not operate near cell phones, radios, computers or other electronic 
devices that emit radio frequencies that may cause unstable readings. 

 

Specifications 

Model 

EHW-EM-03

EHW-EM-06

EHW-EM-15

Max. Capacity 

3 kg (6 lb)

6 kg (12 lb)

15 kg (30 lb)

Readability 

0.5 g (0.001 lb) 

1 g (0.002 lb) 

2 g (0.005 lb) 

Display Resolution 

1:6000

1:6000

1:7500

Min. Recommended Weight

  10 g (0.02 lb)

20 g (0.04 lb)

  40 g (0.1 lb)

Construction 

Stainless steel pan, plastic housing 

Weighing Units 

kg / lb / g / oz / lb:oz

Calibration unit 

kg / lb

Modes 

Weighing

Weight Display 

1-Window LED display, 17.8mm (0.7”) high, 7 digits, 7-segment with eight LED 

annunciators: ZERO, NET, AC, CHG, LB, KG, G, OZ

 

Zero Range 

Power-on zero range: calibration zero point±20%FS;   

ZERO key range: power-on zero±5%FS 

Tare Range 

Up to 102%FS

Stabilization Time 

<5 seconds 

Operating Temperature 

  5

° to 35°C (41°F to 95°F) 

Humidity Range 

<90% relative humidity, non-condensing 

Power Supply 

6V 4Ah lead-acid battery or AC power adapter (12Vdc/500mA with central positive)

Safe Overload Capacity 

150% of capacity

Platter Dimensions (L x W)

215 x 245 mm; 9.65" x 8.46" 

Scale Dimensions(L x W x H)

255 x 308 x 110 mm; 10.04" x 12.13" x 4.33" 

 

 

Summary of Contents for EHW-EM-03










Reviews: