background image

www.measy.kz

                      model: WHD/LKV-388A                                     User Manual

 

 

         www.measy.kz                                                                                                                             

Page 3 

 

            

            

 

HDMI extender TX sender*1pcs   HDMI extender RX receiver*1pcs    DC5V2A power adapter*2pcs 

            

                   

 

IR blaster extension cable*1pcs    IR receiver extension cable*1pcs  User manual*1pcs   

 

4.Installation Requirement 

1. HDMI source device (DVD, PS3, Set top box, PC etc) 
2. HDMI display device like SDTV, HDTV, and projector with HDMI port. 

5.Panel description 

1.

HDMI Extender TX sender 

 

 

1 Power led 

It lights when power is on 

2 Data transmission led 

Led blinks slowly when it is building connection. 
Led blinks fast when it is successfully connected and transmitting data. 

3 Connection led 

It lights when wireless signal is well connected. 

4 Power input 

Connect with DC5V2A power adapter 

5 Reset 

Press reset button to restart the device 

6 HDMI input 

Connect with HDMI source device 

7IR blaster extension cable 
interface 

Connect with IR blaster extension cable. Please put the IR blaster close 
to source device to best transmit the IR signal from receiver. 

8Antenna 

Launch wireless signal 

 

 
 
 
 
2.HDMI extender RX receiver 

Summary of Contents for WHD/LKV-388A






Reviews: