DC5xD MK3 GENSET CONTROLLER USER MANUAL
22
controller detects that the engine Oil Pressure is lower than “
Low oil pressure
warning
”, Then start warning delay and the duration (Normal alarm delay) have not
returned to normal, the warning of low Oil Pressure is reported. "
WARNING
" lights
will light up, Generators will not stop, displays "
Low OP Switch
" on the current fault
screen.
High temperature sensor warning
When the controller parameter "
Action if high temperature
" is set to "
Warning
" and
the AUX. INPUT port "
High temperature disabled
" switch is valid,and the controller
detects that the coolant temperature value is higher than the "
High temperature
warning"
, Then start warning delay and the duration (Normal alarm delay) have not
returned to normal, the warning of High coolant temperature warning is reported.
"
WARNING
" lights will light up, Generators will not stop, displays "
High WT sensor
"
on the current fault screen.
High temperature switch warning
When the controller parameter "
Action if high temperature
" is set to "
Warning
" and
the AUX. INPUT port "
High temperature disabled
" switch is valid,and the controller
detects that the coolant temperature value is higher than the "
High temperature
warning"
, Then start warning delay and the duration (Normal alarm delay) have not
returned to normal, the warning of High coolant temperature warning is reported.
"
WARNING
" lights will light up, Generators will not stop, displays "
High WT sensor
"
on the current fault screen.
Low fuel level sensor warning
When the controller detects that the fuel level value is lower than the "
Low fuel level
warning"
, Then start warning delay and the duration (Normal alarm delay) have not
returned to normal, the warning of Low fuel level warning is reported. "
WARNING
"
lights will light up, Generators will not stop, displays "
Low fuel level-A
" on the current
fault screen.
Low fuel level switch warning
When the controller detects that the AUX. INPUT "
Low fuel level warning input"
switch is active, it starts warning delay and lasts for Normal alarm delay. When the
"Low fuel level warning input"
switch is enabled, the engine low fuel level switch
warning is reported. "
WARNING
" lights will light up, Generators will not stop, displays
"
Low fuel level-D
" on the current fault screen.
External instant warning
When the controller detects that the AUX. INPUT "
External instant warning input"
switch is active, it starts warning delay and lasts for Normal alarm delay. When the
"External instant warning input"
switch is enabled, the warning is reported.
"
WARNING
" lights will light up, Generators will not stop, displays "
Instant warn
" on
the current fault screen.
Speed signal lost warning
When the controller parameter "
Action if RPM lost
" is set to "
warning
", the detected
speed value is 0,Then start warning delay and the duration (Normal alarm delay)
have not returned to normal, the warning of speed signal lost warning is reported.
"
WARNING
" lights will light up, Generators will not stop, displays "
Lose speed
" on
