b.Entering RCC receiving status at 02:00,03:00,04:00,05:00 automatically
c.Press “DOWN” for 2 seconds to enter RCC receiving status forcedly
2. The time for RCC receiving is 7 minutes
3. The displaying of icons during receiving:
a. When it enters RCC receiving status, the tower-shaped part of RCC symbol on the
LCD will flash in the frequency of 1 Hz.
b. When it is receiving the signal, the tower-shaped part of RCC symbol will be still, while
the symbol
of RCC will flash in the frequency of 1 Hz.
4. When it receives the signal successfully, the whole RCC icons will be ON, and exit the
receiving status.
5. When it is receiving signals, press “Down” key, it will exit RCC receiving status,
pressing any other key will have no effect.
6. During the 4 times of auto receiving everyday, if it received signal once, it will not enter
the receiving status automatically until 02:00 next day.
7. When it fails to receive the signals 4 times in a day, it will receive the signal at 02:00
next day.
8. During receiving RCC, if the alarm rings, it will exit RCC receiving status first and
change into alarm ringing status, and will enter the RCC receiving again after the ring
stops.
9. When DST is able and is receiving the signal, it will display the symbol of DST,
showing that it enters the DST system, and the time will be 1 hour faster.
10. When the RCC symbol is displaying, the relative RCC icon will be OFF if the present
time is changed.
18
