background image

Limited Owner Warranty

MEC Aerial Platform Sales Corp. warrants its equipment to the original purchaser against 
defects in material and/or workmanship under normal use and service for one (1) year 
from date of registered sale or date the unit left the factory if not registered. MEC Aerial 
Platform Sales Corp. further warrants the structural weldments of the main frame and 
scissor arms to be free from defects in material or workmanship for five (5) years from date 
of registered sale or date unit left the factory if not registered. Excluded from such warranty 
is the battery(s) which carries a ninety (90) day warranty from described purchase date. 
Warranty claims within such warranty period shall be limited to repair or replacement, 
MEC Aerial Platform Sales Corp’s option, of the defective part in question and labor to 
perform the necessary repair or replacement based on MEC Aerial Platform Sales Corp’s 
then current flat rate, provided the defective part in question is shipped prepaid to MEC 
Aerial Platform Sales Corp. and is found upon inspection by MEC Aerial Platform Sales 
Corp. to be defective in material and/or workmanship. MEC Aerial Platform Sales Corp. 
shall not be liable for any consequential, incidental or contingent damages whatsoever. Use 
of other than factory authorized parts; misuse, improper maintenance, or modification of 
the equipment voids this warranty. The foregoing warranty is exclusive and in lieu of all 
other warranties, express or implied. All such other warranties, including implied 
warranties of merchantability and of fitness for a particular purpose, are hereby excluded. 
No Dealer, Sales Representative, or other person purporting to act on behalf of MEC Aerial 
Platform Sales Corp. is authorized to alter the terms of this warranty, or in any manner 
assume on behalf of MEC Aerial Platform Sales Corp. any liability or obligation which 
exceeds MEC Aerial Platform Sales Corp’s obligations under this warranty.

Summary of Contents for 13500001













































Reviews: