Page 7
69 Seres - Operator’s Manual
February 2019
Secton 3 - Safety Rules and Hazards
Do not replace items critical to machine stability with items of different weight or specification.
Do not modify or alter an aerial work platform without prior written permission from the manufacturer.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not use the machine on a moving or mobile surface or vehicle.
Be sure all tires are in good condition, air-filled tires are properly inflated and lug nuts are properly
tightened.
Crushing Hazards
Keep hands and limbs out of scissors.
Keep hands clear when folding rails.
Use common sense and planning when operating the machine with the controller from the ground.
Maintain safe distances between the operator, the machine and fixed objects.
Maintain a firm grasp on the platform rail when removing the rail pins. Do not allow the platform guard
rails to fall.
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds the slope and side slope rating of the machine.
Slope rating applies to machines only in the stowed position.
Model
Maximum forward slope rating stowed position
Maximum side slope rating stowed position
3369
40%
10%
4069
40%
10%
Note:
Slope rating is subject to ground conditions and adequate traction.
Fall Hazards
The guard rail system provides fall protection. The platform contains multiple lanyard anchorage
points. Attach only one (1) lanyard per lanyard anchorage point.
Do not sit, stand or climb on the platform guard rails. Maintain a
firm footing on the platform floor at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
