Page 2
69 Seres - Operator’s Manual
February 2019
Safety
DO NOT operate this machine until you have read and understood this manual, have
performed the Workplace Inspection, Pre-Start Inspection and Routine Maintenance, and have
completed all the test operations detailed in the Operating Instructions section�����
Failure to read, understand and follow all safety rules, warnings, and instructions could result in
serious injury or death. For your safety and the safety of those around you, you must operate your
machine as instructed in this manual.
MEC designs aerial work platforms to safely and reliably position personnel, along with their
necessary tools and materials, at overhead work locations. The owner/user/operator of the machine
should not accept responsibility for the operation of the machine unless properly trained.
ANSI and other applicable standards identify requirements of all parties who may be involved with
self-propelled elevating work platforms. The ANSI/SIA A92.6-2006 Manual of Responsibilities is
considered a part of this machine and can be found in the manual compartment, located at the
platform control station. To ensure safe use of machine, inspections and training specified in ANSI/SIA
A92.6-2006 must be performed at designated intervals as prescribed.
This product can expose you to chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm. For more
information go to
www�����p65warnings�����ca�����gov�����
Secton 2 - Safety
Safety
