Function Enable At Platform Controls
Note:
If any Function Enable trigger or button is depressed for seven (7) seconds
without any function being activated, the Enable System times out and
deactivates. Release the trigger or button and reengage to activate the
Function Enable System.
The Drive function and most boom functions are enabled by squeezing the trigger at the
front of the appropriate control handle.
ART_4729
Platform Operations Test
Emergency Stop
• Press the EMERGENCY STOP switch at any time to stop all machine
functions.
• Turn switch
clockwise
to reset.
• Depress the EMERGENCY STOP switch whenever the machine is not in
operation. Turn switch
clockwise
to reset.
Activation of the EMERGENCY STOP switch will apply brakes immediately.
This will cause sudden platform movement as the machine comes to an abrupt stop.
Brace yourself and secure objects on the platform during operation of machine.
ART_3353
Select PLATFORM Operation
•
Base Controls:
Turn the selector switch to PLATFORM.
ART_4721
Select PLATFORM Operation
•
Base Controls:
Turn the selector switch clockwise to PLATFORM.
45-AJ Diesel
Operati
ng Instructions & Pre-Operation Function Tests
Page
26
94533r1
–
December 2017
ALWAYS check over, under and around the machine for personnel, structures and obstructions before
activating any control function and continue to watch for hazards while operating the machine.
DO NOT hang anything over any control handle at any time.
Platform Control Panel
