Page 15
45-J Desel - Servce & Parts Manual
January 2022
Secton 9 - Transportng and Lftng Instructons
Driving or Winching onto or off of a Transport Vehicle
Before loading the machine, orient the turntable so that the platform is over the nonsteering wheels
so that the Rotation Lock may be engaged later in the loading process.
ONLY PROPERLY TRAINED AND QUALIFIED OPERATORS SHALL LOAD
AND UNLOAD THIS MACHINE������
READ AND UNDERSTAND ALL SAFETY, CONTROL, AND OPERATING
INFORMATION FOUND ON THE MACHINE AND IN THIS MANUAL
BEFORE OPERATING THE MACHINE������
WHETHER WINCHING OR DRIVING THE MACHINE ON TO A TRUCK OR
TRAILER, ALWAYS CHECK THE AREA FOR DANGEROUS SITUATIONS
BEFORE MOVING THE MACHINE������
IF DRIVING THE MACHINE, ALWAYS USE A SECOND PERSON ACTING
AS A SPOTTER TO MAKE SURE THE PERSON LOADING THE MACHINE
AVOIDS DANGEROUS SITUATIONS������
Driving
Turn the Base Key Switch to PLATFORM. Check that the Emergency Stop Switch is reset by
turning it clockwise.
Enter the platform and reset the Platform Emergency Stop Switch.
Test platform control functions.
Raise the jib slightly for platform ground clearance.
Carefully drive the machine off or on to the transport vehicle.
Make sure you can see the second person giving guidance.
Note:
The brakes are automatically released for driving and will automatically apply when the control
lever is returned to neutral which causes the machine to stop.
Winching
Chock the wheels, then disengage brakes (see Disengage Brakes before Towing or Winching on
page 14).
Carefully operate the winch to lower the machine down the ramp or pull the machine up the
ramp.
Chock the wheels and engage the brakes before disengaging the winch.
Winch
ART_4741
•
•
•
•
•
•
•
•
•
