Page 87
45-J Desel - Servce & Parts Manual
January 2022
Secton 18 - Mechancal Components
Swing Bearing/ Swing Drive Installation
Install the Swing Bearing with the motor axis parallel
to the chassis side sheet. The swing bearing drive
motor should be towards/facing the front axle.
ART_5515
Painted Swing Bearing
Use an alternating criss-cross pattern to tighten the bolts
securing the Swing
Bearing to the chassis. Tighten the bolts in three stages
in numerical order as shown to the right.
Tighten to 50 Lb-ft (68 N-m) on the first pass.
Tighten to 100 Lb-ft (136 N-m) on the second pass.
Tighten to 180 Lb-ft (244 N-m) on the first pass.
Use the same pattern and stages later when securing the
turntable to the Swing Bearing.
ART_5514
ART_5007
2
1
3
5
7
4
6
8
10
12
14
16
18
20
9
11
13
15
17
19