Page 83
65-J Desel - Servce & Parts Manual
February 2021
Secton 18 - Mechancal Components
Disconnect the hydraulic hoses connected to the
Swing Drive.
Rig slings from the Swing Drive to an overhead hoist
as shown.
Remove the bolts securing the Swing Drive.
Remove the Swing Drive from the Control Module.
Note:
Swing Drive Mass:
130 LBS
59 KG
8.
9.
10.
11.
ART_4943
Swing
Drive
Tag and disconnect the hydraulic lines from the top
of the Rotary Manifold.
Tag and disconnect the hydraulic lines from the
bottom of the Rotary Manifold.
Support the Rotary Manifold from below, then
remove the bolts securing the Rotary Manifold in
place.
Remove the Rotary Manifold.
Note:
Rotary Manifold Mass:
60 LBS
28 KG
12.
13.
14.
15.
ART_4944
Rotary
Manifold
Rig slings and a spreader bar from the Turntable Assembly
to an overhead hoist as shown. Use a separate sling for
each lift point.
Apply slight lifting pressure.
16.
ART_4945
