Page 93
65-J Desel - Servce & Parts Manual
February 2021
Secton 18 - Mechancal Components
Lubrication Points
Boom Wear Pads
With the boom in the stowed position, raise the jib and extend the boom completely. Spread a thin,
even coat of lithium-based grease on the areas where the wear pads rub -- top, bottom and sides of
the internal sections of the boom.
Swing Bearing & Gear
Swing Bearing Gear: Apply small amounts of
lithium based grease to approximately every
3rd tooth of the ring gear.
Swing Bearing: Open the Controls Module.
Locate the grease fitting at the front surface
of the Auxiliary Power Unit mounting bracket.
1.
2.
ART_4964
Grease
Fitting
Auxiliary
Power Unit
Controls
Module
Cabinet Latches And Hinges
Apply spray lubricant to latches and hinges. Wipe off excess lubricant.
Engine
Apply spray lubricant to throttle solenoid linkage pivot points. See page 91.
