Page 13
65-J Desel - Servce & Parts Manual
February 2021
Lift And Support The Machine
DEATH OR SERIOUS PERSONAL INJURY MAY RESULT FROM THE USE
OF SUBSTANDARD LIFTING DEVICES AND/OR JACK STANDS������ ENSURE
THAT ALL LIFTING DEVICES AND JACK STANDS ARE OF ADEQUATE
CAPACITY AND IN GOOD WORKING CONDITION BEFORE USE������
BE SURE THAT THE SURFACE BENEATH THE MACHINE IS CAPABLE OF
SUPPORTING THE JACK AND JACK STANDS������
REMOVE ALL MATERIAL, TOOLS AND PERSONNEL FROM THE
PLATFORM BEFORE LIFTING������
The following are needed to safely lift and support the machine;
A jack with a lifting capacity of five (5) tons or more.
Jack stands with a rating of five (5) tons or more.
To Raise The Machine
Move machine to a firm level surface capable of supporting the weight of the machine.
Chock the tires on the end of machine opposite the end to be raised.
If wheel is to be removed, break loose but
do not remove
lug nuts before raising the machine.
Position a jack at the end of the machine to be lifted, under a solid lifting point in the center of
the frame.
Raise the machine and place two (2) suitable jack stands under solid support points at the outer
ends of the frame.
Lower the machine to rest on the jack stands and inspect for stability.
To Lower The Machine
Tighten lug nuts to hold the wheel snug to the hub. Do not torque the lug nuts at this time.
Raise machine slightly and remove jack stands.
Lower the machine and remove the jack.
Tighten lug nuts to proper torque (Refer to Specifications).
Remove chocks.
•
•
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
Lift And Support The Machine
Secton 9 - Transportng and Lftng Instructons
