background image

 

phone: +43 (0) 4242 / 55 100 | fax: - 11 | e-mail: office@mec-energietechnik.at | Web: www.mec-energietechnik.com 

 

 

--  Instruction manual -- 

 

Joe-100IM Battery Charger 

 

Waterproof Lead-based battery charger  

for Wet-, Gel-, AGM- and CA- batteries 

+ Power supply mode 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Version  /  MEC Art-No.

 

 

 

 

12V 7A / 121-06702-530IM                             

 

 

24V 4A / 121-12402-530IM

 

Dear Customer! 

Thank you very much for your trust in us and our product.  
Please read these operating instructions carefully 

before 

start of operation. 

 
MEC-Energietechnik GmbH 

 

1.  Safety Rules and General Warnings 

 

Persons, which are not able to use the device in a safe way, because of their physical, sensory or mental competence, or 
because of their inexperience, should not use the charger without control or instruction of a skilled person. 

 

100-240 Volts alternating current, device is not suitable for children 

– Danger of life!!! 

 

Avoid explosive gases, open flames and sparks 

– ensure for enough air ventilation while charging!  

 

Explosion Risk! 

 

The charger is exclusively designed for rechargeable Lead-based batteries and must not be used for other purposes. 

 

Please consider the charging instructions from the battery manufacturer before charging! 

 

Do not open! Repair work must only be accomplished by authorized companies or specialized technical staff. 

 

If the mains connection of the device is damaged, it must be replaced with an original wire which is available at the manufac-
turer or costumer service. 

 

Never place the device on top of the battery while charging! 

 

Protect against direct solar radiation and temperatures over 40°C. 

 

In case of obvious damage or malfunction disconnect the device from mains supply and protect against unintended reconnec-
tion.  

 

The DC cable must not be cut or shortened. 

Summary of Contents for JOE-100IM

Page 1: ... Volts alternating current device is not suitable for children Danger of life Avoid explosive gases open flames and sparks ensure for enough air ventilation while charging Explosion Risk The charger is exclusively designed for rechargeable Lead based batteries and must not be used for other purposes Please consider the charging instructions from the battery manufacturer before charging Do not open...

Page 2: ... charging status errors and selected mode of charging Additional it includes a power supply mode The chosen battery type could be changed on the control panel The previously selected mode will be saved as standard setting The integrated metal hook allows fixing the charger in different ways 3 Special Features Convection cooled IP68 housing Short circuit and reverse polarity protection LED s to ind...

Page 3: ...harger use controlled current pulses That tries to push the battery to a voltage level where a charging process is possible When battery voltage is still under 6V 12V battery or under 15V 24 V battery after 70 pulses the charger will stop working because the battery maybe is damaged 2 charging phase soft start This charging step is indicated by constant lighting of the Charge LED 4 Explanation Dur...

Page 4: ...e Reverse Polarity Short Circuit Over load Temperature Sensor Internal and External inside DC Cable Certification CE Enclosure Plastic Housing Protection Class 2 IP Code IP68 Dimensions Weight 174 x 84 x 45 mm 850g 9 Advice for Disposal It is prohibited to dispose the charger into the house and residual waste removal WEEE Richtlinie 2002 96 EG und EAG VO it must be disposed at the according collec...

Reviews: