P070/P071/P085/P086/P100/P101
5-7
Operation
5
5.2.5.5 Voorruit ontdoen van ijs/aanslag
(1) Bij lopende motor (stationair toerental) aanjager-
draaischakelaar (5-6/1) in stand „3“ zetten.
(2) Onderste verstelbare uitstroomopeningen (5-7/2)
sluiten.
(3) Bovenste verstelbare uitstroomopeningen (5-7/1)
openen en luchtstroom op de voorruit richten.
AANWIJZING
Als de voorruit vrij is van aanslag respectievelijk
ijs, aanjagerdraaischakelaar in stand „2“ of „1“
zetten en onderste uitstroomopeningen eventueel
openen.
5.3
Decommissioning the loader
5.3.1
Parking the loader
(1) Stop the loader on solid ground; if possible, not on a
slope.
(2) Place the bucket or the attachment on the ground.
(3) Set the drive switch (4-10/11) to “0”.
(4) Apply the parking brake (4-9/3).
DANGER
If parking on a gradient cannot be avoided, wheel
chocks must be used and placed on the sloping
side of the front axle wheels in addition to applying
the parking brake, and the articulation safeguard
must be inserted. On slopes, the wheel chocks
must be placed on the sloping side of the rear axle
wheels.
5.3.2
Switch off the diesel engine
CAUTION
If the diesel engine is very hot or has been
subjected to heavy loads, let the engine idle for a
short time before switching it off.
Turn the ignition key to the left to position "0“ (5-1) and
remove the key.
5.3.3
Switching off the heater and ventila-
tion system
(1) Shut off the hot air supply (5-6/2).
(2) Turn the rotary switch (5-6/1) for the blower to position
"0“.
5.3.4
Leaving the loader
(1) Lock (4-8-/6) pilot valves for the working and auxiliary
hydraulics (4-8/4 and 4-8/5) by setting them to the rear.
(2) Unlock the battery main switch (opt.) (8-36/1) by
giving it 2 counter clockwise turns.
(3) Remove the ignition key and lock the doors.
Summary of Contents for AX 1000
