11 – CONTROLS UTILIZATION
ACCELERATOR CONTROL LEVER
For
Sinopower 168F
engine:
- Lever up : IDLING ;
- Lever down : MAXIMUM SPEED.
For
Honda GC160 engine
:
- Lever back : IDLING and ENGINE STOP;
- Lever forward : MAXIMUM SPEED.
MIN
MAX
MAX
MIN
ENGINE STOP
ENGINE STOP SWITCH
CLUTCH CONTROL LEVER
- Lever DOWN : the clutch is engaged (motorhoe moves
forward or in reverse if selected);
- Lever UP: the clutch is disengaged (motorhoe stops );
- Setscrew for belt tension regulation (part. 1).
N.B.:
BEFORE USING THE MACHINE IT IS
IMPORTANT TO VERIFY CAREFULLY THE
GOOD WORK OF THE SAFETY DEVICE
.
GEAR SHIFT LEVER (only RL 7
2+1
)
- 6 -
1.
Hold the clutch lever UP (part. 1);
2.
Move the gear shift lever in the required position (part.
2). See plate pic. 4 part. A page 5 – RL 7 2+1-;
3.
Accelerate by the lever (part. 3), pull down the clutch
lever slowly (part. 1) and the motorhoe starts running.
4.
To disengage the speeds , keep the clutch lever up and
move the lever (part. 2) to neutral position.
WARNING
Always keep the clutch control lever UP when gears are
shifted.
