electromechanical operator for sliding gates
Nyota 115 evo
19
5 mm
!
MOUNTING THE MAGNETIC LIMIT SWITCH BRACKETS
NOTE WELL: DO NOT OPEN THE BRACKETS TO REVERSE THE ARRAY OF THE INNER MAGNETS; THEY ARE
PROPERLY PRE-ARRANGED FOR THE LOGIC CONTROL BOARD TO IDENTIFY THEM.
!
NOTE WELL: IT IS FUNDAMENTAL THAT THE GATE DOES NOT RUN INTO THE GATE STOPS TOO FAST ON
OPENING AND CLOSING CYCLES; A 30-50 mm CLEARANCE SHOULD BE RECOMMENDED BEFORE THE
LIMIT SWITCHES ARE ENGAGED.
!
Pic. 11
Pic. 12
!
right-hand
DX bracket
Limit switch
left-hand
SX bracket
Open
gate stop
Close
gate stop
30 - 50 mm
!
30 - 50 mm
