electromechanical operator for sliding gates
Nyota 115 evo
23
NYOTA 115 EVO REVERSIBILE
With NYOTA 115 EVO REVERSIBILE it is possible to open or close the gate by hand in case of power failure and the release
handle is not needed. In this kind of installations, it is recommended that an electric lock be mounted on to the gate to hold
it closed: in case of power failure, release the electric lock first and manually operate the gate to open.
It is available in 0,37 kW / 0,5 HP single-phase option.
IMPORTANT: with NYOTA 115 EVO REVERSIBILE use the Elpro 12 evo FN and/or Elpro 37 FN controllers.
It is advisable that the electric lock be xed on to the gate post in vertical position over the gate top in such a position
that releasing by the customized key be allowed either from inside or outside the gate. It is also recommended to make
sure that the guide be sufficiently robust, if not t a strengthening plate to it.
Leave enough
space for the
catch plate
between the
electric lock and
the gate
Electric lock
catch plate
Gate post
Electric lock
with support
plate
Electric lock
release key
Gate
Upper guide
Gate closing
direction
Power supply
to the electric lock
from the controller
Electric lock
Upper
guide
Gate
closing
direction
Catch
plate
Pic. 16
