NEED HELP? 1-800-832-2966
15
STARTING THE MACHINE
Pre-Start Inspection
➢
Make sure all safety guards are in place and all nuts and bolts are secure.
➢
Verify the air pressure in both tires is 25 - 30 psi before each use.
➢
Check oil level, and verify machine is properly filled. The machine is shipped without oil in the engine, oil
must be added before starting the engine.
➢
Inspect air cleaner for cleanliness.
➢
Check the fuel supply. Use fresh unleaded gasoline with an octane rating of 87 or higher. Do not use
gasoline containing more than 10% ethanol. Use of non-ethanol fuel is best. We recommend the continuous
use of a fuel additive/stabilizer to counteract the effects of ethanol. These additives also prolong the shelf life
of gasoline. Fill the fuel tank no closer than 1 inch from top of tank to provide space for expansion.
➢
Be sure spark plug wire is attached and spark plug is tightened securely.
➢
Check position of wheels, ensure in the tilling mode, and secure the wheel locking pins.
➢
Check depth regulator lever position. Ensure tines are clear of the ground before starting.
➢
Examine underneath and around engine for signs of oil or fuel leaks.
➢
Inspect fuel hoses for tightness and fuel seepage.
➢
Look for signs of engine damage.
➢
Remove any debris from muffler area and recoil starter.
Please do not start your tiller until you have read this manual in its entirety, especially the sections regarding operator safety.
Always perform the pre-start checklist before starting the engine.
Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is hot or running. Always move
outdoors to fill the fuel tank.
The wheels must always be locked in the tilling position when the engine is running. Never start the machine with the wheels in
transport mode.
The depth regulator must be placed in the transport position (highest position) so that the tines clear the ground before
starting. Keep hands and feet away from all rotating parts when starting the machine.
