NEED HELP? 1-800-832-2966
23
Tines:
➢
Always check tine condition prior to use.
➢
Damaged or obstructed tines will result in poor tilling performance.
➢
Check tines for obstructions and clear all debris.
➢
If tines are bent, broken, or excessively worn, replace them as a set.
➢
Using the tiller with damaged tines will result in accelerated wear of the machine.
Air Filter:
➢
Always check the air filter assembly prior to use.
➢
Remove the air cleaner cover.
➢
Clean and clear any built-up debris from the air filter housing and the air filter assembly prior to
further disassembly.
➢
Remove the air filter assembly.
➢
Carefully remove the foam pre-filter.
➢
Clean the foam pre-filter with mild soap and water.
➢
Rinse foam pre-filter well, gently squeeze out excess water, and allow foam pre-filter to air dry.
➢
Examine both the foam pre-filter and paper element for damage or excessive contamination.
➢
If both are found to be in good condition, the pre-filter can be placed back onto the air filter element
and the assembly can be returned to service.
➢
If excessive build up or wear is present, replace the air filter assembly prior to returning the
machine to use.
Engine should always be off with the spark plug wire disconnected for safety prior to beginning any repair or
maintenance on the machine.
